- Counters[1]
- Alarm[4]
- Other Measuring & Analysing Instruments[10]
- Healthcare Supplement[1]
- Testing Equipment[5]
- Gauges[9]
- Boring Machine[1]
- Level Measuring Instruments[9]
- Width Measuring Instruments[1]
- Magnetic Materials[1]
- Industrial Metal Detectors[7]
- Ultraviolet Lamps[1]
- Instrument Parts & Accessories[10]
- Bearing Steel[1]
- Spectrum Analyzers[3]
- Other Analysis Instruments[3]
- Densitometers[7]
- Other Optics Instruments[1]
- Dial Indicators[2]
- Hardness Testers[6]
- Contact Person : Mr. Ma Shang
- Company Name : Jining Luke Testing Equipment Co., Ltd.
- Tel : 86-537-2613601
- Fax : 86-537-2638499
- Address : Shandong,JINING,Rencheng Development Zone of Jining
- Country/Region : China
- Zip : 272071
LK310DC AC/DC magnetic yoke detector/ magnaflux yoke inspection
LK310DC AC/DC magnetic yoke detector/ magnaflux yoke inspection uses battery or ac220V directly supply power. Because of its small volume, light weight, especially suitable for magnetic powder flaw of high and narrow field.
LK 310DC magnetic yoke detectors power supplied by the 12V. 7.5 Amp. Hr batteries.
Probe weight: 3.5 kg
Inter polar distance: 0 ~ 206mm
Lifting Power: AC 7kg(>15.pounds) , DC 32kg(>70.pounds)
Power supply voltage:DC12V,AC220V
Frequency : 50 Hz
Charging: 8-12 hours
LK - 310DC (AC/DC) magnetic yoke detector powered by 12V/DC battery, artesian pulse circuit board installed inside of magnetic yoke detector. This circuit provides a very high speed of pulsed DC magnetic field, similar with AC. The DC through magnetic poles can be applied to be the workpiece surface, made a testing debugging intensive DC magnetic field, and detect the surface and near surface defects and detect lesser discontinuous state defects.
Note: this flaw detector use DC power supply, namely it is impossible to get the same sensitivity for small surface defects detection under the circumstances AC magnetic field. Therefore, you should use standard test-components calibration sensitivity in order to detect the smallest defects detection.
LK 310DC meets all the requirements industrial standard on DC magnetic yoke lifting force test, lifting force is 32 kg. Lifting force discontinuities detection ought to be in testing process.
Note: LK - 310DC magnetic yoke detection can use AC 220V dc power supply, but AC220V power grounding lines should be good grounding, in order to ensure the security of person. AC lifting force is 7 kg.
Accessaries
1, magnetic yoke probe 1 only
2, ac lines AC220V 1 root
3, packing box 1 only
4, instruction for use 1 copy
5, warranty card 1 portion
6. certificate 1 copy
7, fuse (3A) 5 only
LK310DC AC/DC magnetic yoke detector/ magnaflux yoke inspection